2020 官網升級中!現在您訪問官網的瀏覽器設備分辨率寬度低于1280px請使用高分辨率寬度訪問。
The power frequency magnetic field is generated by the power frequency current in the conductor, or a very small amount of it is generated by other accessories (such as the leakage flux of the transformer). Power frequency magnetic field may affect the reliable operation of equipment and system. The power frequency magnetic field generator is used to evaluate the performance of household, commercial and industrial electrical and electronic equipment in power frequency (continuous and short-time) magnetic field. The products meet the requirements of new standards such as iec61000-4-8 and gb/t17626.8.
Product model
magnetic field intensity
current waveform
time interval
Current distortion rate
operation mode
Operation method
Working power supply
ambient temperature
PFM 1200
0a/m ~ 1200a/m continuously adjustable
50Hz or 60Hz sine wave
1 ~9999s
<5%
Current range for continuous operation: 1A ~ 500A, 1~9999s/ current range for short-time operation: 501a~1200a, 1~5s
Manual, automatic
AC220V 50/60Hz
15 ℃~35 C
Voltage dips/sags, short interruptions are caused by failures of the power grid and power facilities or sudden large changes in loads. In some cases, there will be two or more consecutive dips or interruptions. Voltage changes are caused by continuous changes in the loads connected to the grid. If the EUT cannot respond in time to changes in the power supply voltage, it may cause malfunctions. Voltage dips generators are used to evaluate the performance of electrical and electronic equipment when subjected to voltage dips/sags, short interruptions, and voltage changes. Products fully meet the requirements of standards IEC/EN 61000-4-11 and GB/T17626.11.
Sur S20 lightning surge generator (maximum output voltage up to 20kV) complies with IEC (International Electrotechnical Commission) standards iec61000-4-5, ul1449, European electrical standard (en61000-4-5) and national standard (gb/t17626.5), large screen LCD touch screen control, program-controlled high voltage principle, peak voltage up to 20kV, suitable for outdoor products, military standard products and non-standard products.
The lightning surge generator sur s10l meets two kinds of surge waveforms: 1.2/50us and 10/700us. It is a surge (shock) immunity test product designed for the power port and communication port of various electronic and electrical products, which is used to evaluate the performance of electronic, electrical, communication and other products when they are subjected to high-energy disturbance from the power port and other signal ports. The product meets the requirements of new standards such as IEC 61000-4-5 and gb/t 17626.5.
Sales Hotline：400-021-6779 Switchboard：021-67727150
3255 Shengang Road, Songjiang Industrial Zone, Shanghai 2F, building 11
Silicon valley power, No. 416, Xuegang North Road, Longhua District, Shenzhen 2nd floor, building A4, Qinghu Park
No. 3, Rongjing East Street, Yizhuang Economic Development Zone, Beijing Room a1821, Lido, Rongjing
Official wechat
Multifunctional Immunity Tester
Automotive ESD Generator
Radio Frequency Electromagnetic Field Radiation Immunity System
Impulse Voltage Generator
Anechoic Chamber
EMC Antenna
Contact us
